DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, High Performance Dry Bath Heating Block "MaXtable
TM
H20"
15/22
the pre-set operation.
6. The Delay Timer cannot be activated during heating of the
product or during operations led by the Timer. Stop the
operation of product to set values for the Delay Timer.
7. If pressing Mode button, it is switched to the timer setting
screen.
3.3.3 Setting Operation Temperature
1. Click the MODE button in the display of setting of timer
then the display will be changed into the display of setting
values of the operation temperature.
2. The figures displaying on the PV correspond to the value of
current temperature whereas the figures displaying on the
SV are the values of set temperature.
3. Rotate the rotary switch on the controller clockwise or
counterclockwise to adjust the set values. The values
available for the set temperature ranges from 15.0℃ to
150.0℃ and the set values will be varying by the unit value
of 0.1℃.
4. Push the Rotary Switch once and shortly then the product
will start the heating operation to the set temperature.
5. Push the Rotary Switch once shortly in the display of setting
of operation temperature during an operation of the
product then the product in its heating operation will stop
thereby.
6. Push the rotary switch for 2~3 seconds then the set value
will be blinking and be stored thereby. The stored value that
remaining unchanged will be reappearing by the next turn-
on of power supply.
