Daihan Scientific ICA-100, User Manual

Page: 7 / 28

DAIHAN Scientific, Air-jacketed CO2 Incubators 7/14
1.6. Operating
■ Before Operating
When you turn on the circuit breaker and power switch on the
side of the device, the message on the left appears on the LCD
screen for 3 seconds. If there is no abnormality after performing
the self-diagnosis of the controller, the current value display
screen appears and waits for control start.
The basic control items are chamber temperature, CO2 gas
concentration, door temperature and operating time, and
humidity displays only
There are two control modes: NORMAL (Manual) mode and
PROGRAM MODE.
T = Chamber Temp / Co2 = Co2 gas
D = Door Temp / Hum = Humidity
Tm = Timer / SvT = Set Temp
NORMAL MODE is a set value that keeps the internal
environment of the chamber. PROGRAM MODE is a mode to
change the internal environment of the chamber up to 10 STEPs.
■
How to set NORMAL (Manual) mode
In the NORMAL mode, press the MODE button on the main
controller to set the desired temperature, etc.
.
Temp (T), CO2,
Door Temp (D), and Timer (Tm) are displayed on the LCD screen
along with the beep sound, Use the number keys and the SHIFT
(←) buttons to enter the desired value and press the ENTER
button to the next set value. After all the settings are completed,
press the MODE button to return to the current value display
screen.
If there is no input for more than 1 minute on this screen, it returns
to current value display screen automatically.
When pressing the START key in the control standby screen, the
standby screen changes to the active screen and starts to control
of each setting value.
At this time, CO2 gas starts control from the moment the
temperature reaches 36.0
℃
for precise control.