This document and all the information herein are confidential, and the exclusive
property of Dai Telecom. Do not copy, distribute or disclose this material without
prior permission from Dai Telecom.
Page 18 of 21
5.7.2.2
Installing the Internal Adapter and Coaxial Cable
5. Carefully remove the clear plastic cover protecting the internal adapter.
6. Move the adapter, on the inside of the window, toward the antenna base (the
external adapter), and direct the adapter so as to fully overlap the base.
7. Carefully press the antenna adapter to the window. Ensure all adapter corners
are attached to the window.
8.
Direct the antenna’s coaxial cable along the car beam. Ensure the antenna cable
does not get damaged.
Note!
Do not direct the microphone cable and antenna cable together on the
same beam (lintel).
9.
When completing the cable’s installation and reaching close to the control cable
connected to the Phone, please leave approximately 30 cm of additional wire and
cut off the unnecessary extra cable.
10. Press a connector at the end of the cable. Use the original plug and pressers
only.
11.
Examine the antenna and cable’s proper working order with an efficiency meter.
