23
The system displays “Network” interface, as shown in Figure 2-16 or Figure 2-17.
Please set according to network access mode in actual application.
IP addresses of VTH and VTO shall be in the same network segment. Otherwise, VTH
will fail to obtain VTO info after configuration.
Figure 2-16
Figure 2-17
Wired IP
Enter “Local IP”, “Subnet Mask” and “Gateway”, press [OK]. Or press
to enable
DHCP function and obtain IP info automatically.
If the device has wireless function, please click “Wired IP” tab to set it.
WLAN
Press
to enable WIFI function.
1.
