18
the planned network segment and login WEB interface again.
Login WEB interface again; select “System Config > LAN Config”.
Step 6
The system displays “LAN Config” interface, as shown in Figure 2-9.
Figure 2-9
Enter VTO “Building No.”, “Building Unit No.” and “VTO No.”.
1.
To call the management center, please tick “Register to the MGT Center”, and
set “MGT Center IP Address” and “MGT Port No.”.
To provide group call function, please tick “Group Call” and set “Max
Extension Index”, which is 5 at most.
Click “OK”.
2.
Select “System Config > Digital Indoor Station Manager”.
Step 7
The system displays “Digital Indoor Station Manager” interface, as shown in Figure
2-10.
Add master VTH.
After “Network” interface of extension VTH has added and enabled master VTH,
VTO interface will obtain extension VTH info automatically.
Figure 2-10
Click “Add”.
1.
Enter VTH “Family Name”, “First Name”, “Nick Name”, “VTH Short No.” (VTH room
2.
no.) and “IP Address”.
It is OK if IP address is not filled in. After VTH is registered to VTO successfully,
VTO will obtain IP address of VTH.
