Dahua Video ConferencingEndpoint Quick Start Guide
22
6
Voice
You can make detection over microphone and speaker, the operation steps are shown as follows:
Step 1
Select
“Voice” and press
button. The system will display the interface which is shown in
Figure 6-1.
Figure 6-1
Step 2
Speak to the microphone according to the prompt on the interface.
The progress bar means volume, then it will reach the top red area when the volume is too
big.
Please try the following solutions if you cannot see the progress bar.
Check if the microphone volume beats.
Please check if the port is correctly plugged into microphone port if it is connected to
external microphone.
Step 3
Select
“Next” and press
button. The system will display the interface which is shown in
Figure 6-2.