Dahua TS20A0 Quick Start Manual Download Page 10 | Manualshive

Page: 10 / 33

Dahua TS20A0 Quick Start Manual Download Page 10

Dahua Video ConferencingEndpoint Quick Start Guide

1

1

Product Overview

1.1

Brief Introduction

TS20A0 is a type of integrated video conferencing endpoint with small size which is presented by

Dahua; it integrates HD digital camera, stereo microphone and speaker. The operation is so

convenient that it only needs to connect the device to power and network to realize video

communication; the device can be operated and controlled via remote control, keyboard, mouse

and etc., which is quite suitable for video conferencing in the enterprise, government and crossed

region; besides, it is fit for home users as well.

1.2

Features

Apart from being portable and convenient installation, the device also owns the following features:



Supports mouse and keyboard operation, quick configuration.



Built-in Wi-Fi module, support wireless network connection.



Supports data sharing.



Integrates built-in MIC and speaker.

1.3

Product Structure

1.3.1 Structure Figure of Video Conferencing Endpoint

Please refer to Figure 1-1 and Figure 1-2for the structure of both front panel and rear panel

respectively.

Figure 1-1

«
...
8
9
10
11
12
...
»

Summary of Contents for TS20A0


































Reviews:

No comments