25
same.
Cancel
Click it to cancel your current setting.
Restore
Here is to restore extra stream factory default setup. Click the Restore button,
you can see the system pops up a dialogue box asking you to restore factory
default setup or not. Click OK button, system will begin restoring.
Please note if the device is recording, system can not restore the factory default
setup. You can see the corresponding dialogue box.
Important
z
In the record mode, you can not change the video resolution, video frame rate, video bit rate
and audio bit rate. You can see the corresponding dialogue box.
z
Please note if the device is recording, system can not restore the factory default setup. You
can see the corresponding dialogue box.
3.6.3.5 Boot up Interface
In Figure 3-14, please use Left and Right button to highlight Boot up Interface item and then click
OK button to go to the boot up dialogue box. You can set to use your self-defined boot up
int6erface.
Click Cancel you can go to the previous interface, click Ok you can update the boot up interface.
Important
Before modification, Please copy the logo.bmp file (16-bit or 24-bit color, 360*240) to the
UPDATE folder.
Please make sure the boot up file name is logo.bmp, other file names are invalid.
3.6.3.6 Network Setup
Important
Before the operation, please make sure your device has the network module.
In the Parameter interface, please highlight the network icon and then click the OK button to go
to the network interface.
3.6.3.6.1 WIFI Setup
The WIFI setup interface is shown as in Figure 3-21.
Figure 3-21
Please refer to the following sheet for detailed information.
Name
Function
