9
Note
For some other models, there are only reset button and DIP switch without any other buttons
which are located on the PCB of speed dome lateral (without label), please refer to the actual
device for installation.
SD card slot is located on the module control panel; it can be seen after you open the rear cover
which is shown in Figure 2-11. Please pay attention to the direction of pulling and plugging Micro-
SD card. First press the card slot downward slightly, move it towards the OPEN direction (refer to
the instruction on the slot) and the card slot will become loose, and then lay the SD card. Please
be noted that the card metal surface has to be corresponding with the golden finger of card slot,
and then press down the card slot slightly, move it towards CLOSE direction.
Figure 2-11
2.5
Speed Dome Installation
Note
The chapter can be applied
to IR analog intelligent speed dome and IR network intelligent
speed dome and so on.
There are various types of brackets which can meet different application scenarios for the speed
dome, please refer to chapter 3 to chapter 6 for the installation methods. It is to take analog
speed dome wall-mounted bracket as an example to install IR speed dome.
Step 1
Use quick mount screw on the speed dome and quick mount bayonet on the bracket to fix the
speed dome on the bracket, and then fix the speed dome firmly by using M6 inner hex screw,
which is shown in Figure 2-12.
