8
2.3.1.3 Address
The address value ranges from 0 to 255. The default setup is 0. When there is cascade
connection, the 0 has the highest priority and the 255 has the lowest priority. See Figure 2-6.
Figure 2-6
2.3.1.4 Aux
It is to set screen backlight and auto logout function. See Figure 2-7.
Backlight: It is to set screen backlight. The options are: on/off.
Auto logout: After you enable the auto logout function, system can auto logout when there is
no operation for specified time.
Figure 2-7
2.3.1.5 System Update
Do not remove the flash disk during the whole process. Otherwise it may result in
upgrade failure and the network keyboard can not boot up properly.
The flash disk upgrade function is for speed dome keyboard or analog keyboard series
product. You can use the
update.bin
file on the USB device to upgrade.
Please select system update interface and click
【
ENTER
】
button to go to the update
interface. Follow the prompt to click the
【
ENTER
】
to update.
For network keyboard, you can use the Windows upgrade tool.
Please contact your local retailer or visit our official website to get the Windows upgrade tool.
The REC Upgrade or REC Upgrade are both OK. If the ConfigTool can not search the
keyboard, please upgrade manually.
Now we use REC Upgrade for an example. The interface is shown as below. See Figure 2-8.