62
A:
Make sure the light condition is good and then put the plate on the rectangle of the interface to
snap.
Q:
Device can not indicate the south and north direction.
A:
Hold you device and then move hand to draw
“8”.
Q:
Camera video is not clear.
A:
Use clean cloth to clear the lens.
User manage
Q:
How can I scan the fingerprint?
A:
From user manage->personal information->password-Fingerprint, select the finger type and
then follow the prompt to move the finger from top to the down several times to scan. When the
process bar is full and become red, click the OK to exit.
Camera
Q:
After I install the camera from the third-party, why the setup is not valid (Settings->Device-
>Camera)?
A:
The setup here is only for the device built-in device.
Q:
After I restored the default setup, I changed the camera setup. But I found the setup was null
after I went to the camera interface. Why?
A:
After you restored the default setup, you need to go to the camera interface first and then exit.
Now you can change the camera setup and then save the new settings.
Q:
The camera disturbed by the environment or there is illegal operation.
A:
Reboot the device.
Summary of Contents for MPT300
