60
A:
From setting->data->Mobile network->Connection name (APN), change APN name password
(Please contact your operator for the name and password). For the rest items you can use
default setup. Click Save button.
Q:
GPS function is null.
A:
Take the device to the outside environment, open GPS for about one minute and a half. You
can see the GPS function is valid now.
Q:
My device can not recognize my inserted external TF card.
A:
Insert the TF card on the computer and then format to FAT32. Now insert it on the device.
Q:
Device dial function failed.
A:
There are the two possibilities:
There is no SIM card. Please check the SIM card position.
There is no APN. Please set the proper APN.
Q:
The device screen can not work.
A:
Unplug the power cable; press the power button of the device.
Q:
I can not cancel the Bluetooth pair.
A:
Disable the Bluetooth function and then enable again.
Platform
Q:
My device has not shown as online after I set the platform information.
A:
Usually, there is about one minute delay after you set the platform information. If it is still
offline after you wait for a long time, please disable the platform connection and then enable
again (Setting->Platform->Platform connection).
Q:
How can I search the device record on the platform?
A:
Please follow the steps listed below.
Select the search record on the device (the default setup is search the record on the
platform.)
Select the device channel you want to search.
Select date and then click search button.
If system pops up the dialogue box “Please set at least one channel”, please select a device
channel you want to search.
If system pops up the dialogue box “There are no results to display”. Please make sure you
are searching the record on the device instead of the platform center. There is record file on
the specified period.
Q:
The video is not fluent when I use the real-time monitor function.
A:
Please go to the Settings->Camera->Net encode->Built-in camera, you can set the video
quality as VGA (640*480), bit stream value is 1Mbps or 512Kbps or lower.
Q:
Device is not on the platform I registered.
Summary of Contents for MPT300
