Dahua MCVR5104GCW Page 9 User Manual Download

Page: 9 / 142

1 Features and Specifications

1.1 Overview

This series HDCVI mobile DVR is a series mobile DVR based on our latest platform.



It integrates video process, wireless network technology, GPS technology, structure

technology, and vehicle information sampling and process technology together.



It adopts solid aluminum alloy case and has one built-in 2.5-inch HDD or SD card as the

storage media. Support built-in 3G/WIFI wireless transmission module and GPS module.



It can be used on the vehicle to realize local audio/video storage and vehicle information

sampling. It can send out real-time video and vehicle information to the remote

management centre via the WAN to build up a wireless surveillance management

system.

This series product can be widely used in various areas such as public transportation,

long-distance bus, public security patrol, public security, logistics transportation and etc. It can

also be sued in many environments which has high requirement for the video monitor.

Important

Please note, GPS, WIFI, 3G function are optional. Please make sure you purchased product

support these functions.

1.2 Function

Slight difference may be found due to different series products.



Storage function

Special data format to guarantee data security and can avoid vicious data modification.



Compression format

Support multiple-channel audio and video signal. An independent hardware decodes the audio

and video signal from each channel to maintain video and audio synchronization.



Backup function

Support backup operation via USB port (such as flash disk, portable HDD)

Client-end user can download the DVR file to local HDD to backup via network.



Record playback function

Support each channel real-time record independently, and at the same time it can support forward

play, network monitor, record search, download and etc.

Support various playback modes: slow play, fast play, backward play and frame by frame play.

Support time title overlay so that you can view event accurate occurred time

Support specified zone enlargement.



Network operation

Support network remote real-time monitor, remote record search and remote PTZ control.



Alarm activation function

Summary of Contents for MCVR5104GCW















































































































































Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands

Dahua MCVR5104GCW, User Manual

Search results

Summary of Contents for MCVR5104GCW

Reviews:

Related manuals for MCVR5104GCW

Brands by name

Popular brands