104
The FTP function is on if you check the Enable box here.
When network is offline or malfunction, system can save record or picture to HDD.
Figure 5-41
5.9.4.3 Record control
The record control interface is shown as in Figure 5-42.
Figure 5-42
Please refer to the following sheet for detailed information.
Parameter Function
Channel
Here you can view channel number.
The number displayed here is the max channel amount of your
device.
Status
There are three statuses: schedule, manual and stop.
Schedule
System enables auto record function as you set in record schedule
setup (general and alarm).
