Initial Configuration
16
IP Setting
Figure 3-5
Configure the IP address.
Step 2
Click
corresponding to the Ethernet port.
1)
The Edit Ethernet Network 1 interface is displayed. See Figure 3-6.
Editing Ethernet network
Figure 3-6
Configure the parameters.
2)
When there is a DHCP server in the network, select this check box and the
system can allocate a dynamic IP address to the Device. There is no need to
set IP address manually.
When selecting using static IP address, you can enter the static IP address,
subnet mask and gateway to set a fixed IP address for the Device.
