Initial Configuration
12
3
Initial Configuration
If it is your first time to boot up the Device, please initialize the Device and set the basic
information and functions.
3.1
Boot up
CAUTION
Before the boot up, please make sure:
The rated input voltage shall match the device power on-off button. Please make sure the
power wire connection is OK.
For device security, please connect all the other device cables first and then connect the
Device to the power.
Always use the stable current with little ripple interference, if necessary UPS is a best
alternative measure.
Some series products do not have power on-off button, connect the Device to the power
socket to boot up directly.
Before you boot up the Device, see "2.4 Connecting Cables" to connect the cables.
For 8-HDD series product: Press the power button on the rear panel to boot up the Device.
For other series products:
Connect to the power socket to boot up the Device.
After clicking shut down on the GUI to turn off the Device. Press the power button for a
short period of time to boot up the Device.
3.2
Initializing the Device
If it is your first time to use the Device, please set a login password of
admin
(system default
user). At the same time, you can set proper password protection method.
Turn on the Device.
Step 1
Enter device initialization interface. See Figure 3-1.
