User's Manual
15
Figure 3-4 Removing TF card
3.3 Connecting Cable
You need to use a 2.0 mm screwdriver to connect cables.
●
Avoid copper wire exposure when connecting the power cord. With 220 V power supply, copper
wire exposure might cause electric leakage, and thus bringing personal injury.
●
When removing the cable, turn off the power of the Camera first to avoid leakage. This helps
prevent personal injury.
●
To ensure the Camera is properly grounded and improve device reliability, make sure that:
①
The device port is connected to the PE (earth wire) of the protective cover.
②
The PE is
connected to the ground.
●
The picture is for reference only, and might differ from the actual device cable.
Figure 3-5 Cable connection example (1)
3.3.1 Installing the Cable
Step 1
Insert the screwdriver into the square slot corresponding to the connecting cable. Press
Summary of Contents for ITC952-AU3F-L
Page 1: ...All in one Enforcement Camera User s Manual ZHEJIANG DAHUA VISION TECHNOLOGY CO LTD V1 0 3...
Page 7: ...User s Manual VI Appendix 1 Cybersecurity Recommendations 27...
Page 19: ...User s Manual 12 Figure 2 12 Dimensions mm inch DHI ITC952 RU2F BD No illuminators...
Page 37: ...User s Manual...
