Installation and Configuration Manual
35
4.2.2
Configuring Remote Control of DHI-IPMECD-302X Barrier Gate
Receiver
●
Match the remote information
◇
Successful matching: Press and hold the learning button on the receiver for 2 s, press the remote
handle at least twice and then you can press keys on the remote to control the arm.
◇
Failed matching: The remote handle is not pressed a while after pressing the learning button on
the receiver, and the receiver indicator does not flash 3 times immediately, but flashes 7 times
after about 8 seconds.
Clear the remote information: Press and hold the learning button on the receiver for more than 3
seconds, and then the remote cannot control the arm. This means the matching information has
been cleared.
Checking System Functions
Item
Functions
Contents
Camera
Capture
After the vehicle passes through the capture line, check
whether there are snapshots and recognition results
generated on the webpage. If there are, it means that the
capture function is normal.
Barrier
opening
control
Check the physical circuit of the camera and the barrier
opening parameters for camera allowlist.
