30
Parameter
Description
Contrast
Change the value when the image brightness is proper but contrast is
not enough.
●
If the value is too big, the dark area is likely to become darker, and
the bright area is likely to be overexposed.
●
The picture might be blurry if the value is too low. The
recommended value is from 40 to 60.
●
The higher the value, the more obvious the contrast between the
bright area and dark area.
Saturation
Adjust the color vividness, and it will not influence the image overall
brightness.
●
The image becomes too flamboyant if the value is too high.
●
The recommended value is from 40 to 60.
●
The higher the value, the more flamboyant the image.
Gamma
Adjust the image brightness level. The higher the value, the brighter
and more blurry the image.
Mode
Select image display mode. The image changes to colorful when the
ambient brightness is higher than the preset value, and changes to
black and white when lower if you select
Auto Switch by Brightness
.
Step 4
Click
Confirm
.
5.4.2.1.2 Advanced Attributes
This section provides guidance on configuring advanced attributes, including exposure mode,
shutter mode, white balance and scene mode.
Step 1
Select
Setting
>
Camera
>
Camera Attribute
>
Advanced
.
Figure 5-25 Advanced attributes
Step 2
Select a channel.
Step 3
Configure parameters.
Table 5-12 Advanced parameters description
Parameter
Description
3D NR
Video Tridim
Denoise
When it is
On
, 3D NR is enabled to reduce noise of video.
Video Spatial
Spatial video denoising. The higher the value, the fewer the noise.