29
test the control of lights.
Light Status
refreshes every time you test the light.
Source IP
is the IP address which
sends out the test command.
Step 5
Click
Check
under
Abnormal Config
to check for abnormal configurations.
Step 6
Under
Export Device Info
, select different types of information to be exported to the local
computer.
Logs can be encrypted.
5.4.2 Camera
You can configure image, video, and stream parameters.
5.4.2.1 Camera Attribute
You can adjust the brightness, contrast, saturation of the video image, and set shutter parameters to
get clear videos, and recordings that you want.
5.4.2.1.1 General
This section provides guidance on configuring parameters such as image brightness, contrast,
saturation, and hue.
Step 1
Select
Setting
>
Camera
>
Camera Attribute
>
General
.
Figure 5-24 General settings
Step 2
Select a channel.
Step 3
Configure parameters.
Table 5-12 General parameters description
Parameter
Description
Brightness
●
Adjust the overall image brightness. The bright and dark areas will
have equal changes when adjusting the value.
●
The image becomes blurry when the value is too big. The
recommended value is from 40 to 60.
●
The bigger the value, the brighter the image.