5
2
Device Installation
Important
Please make sure the installation surface can min support the 3X weight of the camera
and the bracket.
Figure 2-1
Please see Figure 2-1.
Step 1
Stick installation position map to designated surface where you will install the device
Step 2
Dig a hole according to position of hole on installation position map.
Step 3
Open accessories bag, take out expansion bolt and insert it into the hole you just dug.
Step 4
Open accessories bag, take out screws. Tighten the 3 screws to fix the device on the installation
surface where the bolts are located.
Step 5
Put the camera body into the installation bracket directly.
Step 6
Connect front-end lens to camera body by cable.
