Dahua HDBW2831R-ZAS, Operation Manual

Page: 142 / 256

Operation Manual
129
Figure 5-8 Setting (snapshot time period)
2. Select a day, and the alarm type next to a period. Then set the period.
◇
Select
All
or checkboxes of some days to set the time period of multiple days at
one time.
◇
You can set 6 time periods per day.
3. You can set 6 time periods per day.
Step 3 Click Save .
5.1.1.3.2 Setting Snapshot Linkage
On the alarm event setting interface (such as the motion detection interface), select Snapshot and
set alarm linkage snapshot.
Figure 5-9 Snapshot linkage
5.1.1.4 Relay-out Linkage
When an alarm is triggered, the system can automatically link with relay-out device.
On the alarm event setting interface (such as the motion detection interface), select
Alarm and set
Alarm Delay .
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
Figure 5-10 Relay-out linkage
5.1.1.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to users.
Email linkage takes effect only when SMTP is configured. For details, see "4.6.5 SMTP (Email)".