Dahua HDBW2831R-ZAS, Operation Manual

Page: 113 / 256

Operation Manual
100
Parameter Description
Customized Picture Name
Click Setting to set picture name.
● Date&Time
is required, and it is selected by default.
●
Select the other fields of the name, and the corresponding
instruction will be displayed on the screen.
●
Double-click the symbols under Separator , you can customize
the separator.
●
Double-click
Custom
, you can customize the files of the
picture name.
●
Click the arrow under
Ordering
, and you can adjust the
ordering of the file.
Date&Time and Millisecond is a whole, click the arrow of any
one of the two fields, the two moves together.
●
The real-time value of Millisecond will be displayed for precise
snapshot, and for schedule and normal event, the millisecond
displays 0000.
Emergency (Local)
Select Emergency (Local) , and when the FTP server does not work,
all the files are saved to the internal SD card.
Step 4 Click
Save
.
Step 5 Click test to test whether FTP function works normally.
4.7.3.4 NAS
This function can be enabled only when NAS was selected as a destination path. Enable this function,
and you can save all the files in the NAS.
Step 1
Select Setting > Storage > Destination > NAS .
Figure 4-95 NAS
Step 2 Select the Enable checkbox to enable NAS function, and select NAS protocol type.
●
NFS (Network File System): A file system which enables computers in the same network
to share files through TCP/IP.
●
SMB (Server Message Block): Provides shared access for clients and the server.
Step 3 Configure NAS parameters.
Table 4-35 Description of NAS parameters
Parameter Description
Server Address The IP address of the NAS server.
Username
When selecting SMB protocol, you are required to enter user