Quick Start Guide
5
Alarm output
Figure 1-5
Log in web interface, and configure alarm input and alarm output in alarm setting.
Step 3
The alarm input in the web interface is corresponding to the alarm input end of the I/O
port. There will be high level and low level alarm signal generated by the alarm input
device when alarm occurs, set the input mode to NO if the signal is high level and to NC
if the signal is low level.
The alarm output in the web interface is corresponding to the alarm output end of the
device, which is also the alarm output end of the I/O port.
Summary of Contents for HD Box
