Dahua DVR0X04AH-VD-E User Manual Download

Page: 10 / 205

FEATURES AND SPECIFICATIONS

1.1

Overview

This series product is an excellent digital monitor product designed for security field. It adopts embedded

design to maintain high security and reliability. It has various functions such as record, playback, monitor

at the same time and can guarantee audio/video synchronization. This series product has advanced

technology and strong network data transmission function.



Embedded Linux OS to maintan system sound and stable operation.



General H.264 video compression and G.711A audio compression technology to realize high video

quality and low bit rate.



Unique frame by frame playback function to show the detailed information when playback. Suitable

for the details analysis.



It can work in the local end, and at the same time, when connecting it to the professional

surveillance software (PSS), it can connect to security network to realize strong network and remote

monitor function.

This series product can be widely used in various areas such as banking, telecommunication, electric

power, interrogation, transportation, residential district, factory, warehouse, resources, and water

conservancy.

1.2

Features

This series product has the following features:



Real-time monitor

It has analog output port, VGA port and HDMI port. You can use monitor or displayer to realize

surveillance function.

System supports TV/VGA/HDMI/LCD (For product of the LCD) output at the same time.



Storage function

Non-working HDD adopts hibernation technology to guarantee sound ventilation and low power

consumption to extend HDD lift span.

Special data format to guarantee data security and can avoid vicious data modification.



Compression format

Support 4/8-channel audio and video. An independent hardware decodes the audio and video signal

from each channel to maintain video and audio synchronization.



Backup function

Support backup operation via USB port (such as flash disk, portable HDD, USB burner).

Support backup via eSATA port.

Client-end user can download the file to local HDD to backup via network.



Record and playback function

Summary of Contents for DVR0X04AH-VD-E














































































































































































































Search results

Summary of Contents for DVR0X04AH-VD-E

Reviews:

Related manuals for DVR0X04AH-VD-E

Brands by name

Popular brands

Dahua DVR0X04AH-VD-E, User Manual

Search results

Summary of Contents for DVR0X04AH-VD-E

Reviews:

Related manuals for DVR0X04AH-VD-E

Brands by name

Popular brands