Installation 4
3
Installation
Make sure the mounting surface is strong enough to hold at least three times of the
camera weight.
Keep the protection film on the camera before installation and adjustment finished to avoid
possible scratch.
Properly handle the device after unpacking. Do not expose the device in humid
environment.
The following figures are for reference only, and the actual product shall prevail.
For the installation of model A, see "3.1 Installing Model A"; for the installation of model B, see
"3.2 Installing Model B"; for the installation of model C, see "3.3 Installing Model C."
Installing Model A
3.1
Model A installation
Figure 3-1
Table 3-1 Installation item list
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Positioning map
③
Expansion bolt
④
Pedestal
⑤
Self-tapping screw
⑥
Device
⑦
Enclosure
⑧
Locking screw
—
—
Loosen the locking screw
⑧
with the supplied wrench, and then take off the pedestal
Step 1
④
.
