Installation 6
Connect the device
①
to power source and the XVR device, and then the live view
Step 3
screen is displayed.
Aim the lens to the ideal angle, and then fasten the locking screws. See Figure 3-4.
Step 4
Model B adjustment
Figure 3-4
In Figure 3-4,
①
represents the locking screws.
Installing Model C
3.3
Model C installation
Figure 3-5
Table 3-3 Installation item list
No.
Item
No.
Item
No.
Item
①
Device
②
Self-tapping screw
③
Expansion bolt
④
Positioning map
⑤
Mounting surface
—
—
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 1
the mounting surface
⑤
) as the positioning map
④
indicates, then drill the holes on the
mounting surface
⑤
, and then insert the expansion bolts
③
into the screw holes.
Align the screw holes on the bracket to those on the mounting surface
⑤
, and then pull
Step 2
the cable out through mounting surface or the side cable tray. Attach the bracket to the
mounting surface
⑤
with the self-tapping screws
②
.
Connect the device
①
to power source and the XVR device, and the live view screen is
Step 3
displayed.
Aim the lens to the ideal angle, and then fasten the locking screws. See Figure 3-6.
Step 4
Model C installation
Figure 3-6
