33
Sheet 5-5
Digital IO Control - Parameter Explanation
Parameter
Explanation
LineSelector
Selects the external IO line for configuration.
LineMode
Configures the output mode of selected IO Line
：
Input/Output.
LineInverter
Controls the selected physical input or output line signal inversion,
True is for the signal to invert, False for the signal not to invert.
LineStatus
Indicates the current status of the selected physical input or output
line.
LineStatusAll
Returns the current status of all available lines.
LineSource
When IO line is selected to be the output, you can select the trigger
source. Current supported trigger sources are as follows
：
ExposureActive: outputs the signal when exposure starts.
FrameTriggerWait: outputs the waiting signal for frame trigger.
Timer0Active: outputs the signal when the Timer0 counts up.
UserOutput0: outputs the value user set in Userset0.
AcquisitionTriggerWait: outputs the waiting signal for
acquisition trigger.
LightTrigger: outputs the light trigger signal.
Output 1 means the opto-coupler is on, 0 means off.
LineFormat
Shows whether the currently selected IO line supports opto-coupler
isolation.
UserOutputSelector
User-defined output group selection.
UserOutputValue
The output value of the user-defined output group.
UserOutputValueAll
Sets all values of the user-defined output group to 0 or 1.
LineDebouncerTimeAbs
Sets the absolute value of the selected line debouncer time in
microseconds
A pulse less than the set value will not be considered as a valid
trigger input.
5.5
EventControl
In this property, you can control the event, as shown in Figure 5-5; please refer to Sheet 5-6 for detailed
parameter settings.
