13
Installing Hang-mounted Bracket
4.2.1 Installation Conditions
The hang-mounted bracket is applicable to hard wall in both indoor and outdoor environments.
Make sure:
The wall shall be thick enough to install expansion bolts.
The wall shall sustain at least eight times the weight of the speed dome and its mounting
accessories.
4.2.2 Installation Procedure
Loosen the M4 screw, and separate the connection plate and the connection pole of
the bracket.
Route the cables through the groove to the flange of the connection plate. Fix the
connection plate on the ceiling with four screws. See Figure 4-3.
Installing hang-mounted bracket (1)
For outdoor environment, apply silica gel to cover the contact surface between
connection plate and ceiling, and cable outlet area for waterproof.
Route the cables through the connection pole, and fix the connection pole on the
connection plate with the M4 screw. Push the decorative cover to the bottom of the
connection pole. See Figure 4-4.
