16
Installing Corner-mounted Bracket
5.2.1 Installation Conditions
The corner-mounted bracket is applicable to hard wall which forms an included angle of 90° in
both indoor and outdoor environments.
Make sure:
The wall shall be thick enough to install expansion bolts.
The wall shall sustain at least eight times the weight of the speed dome and its mounting
accessories.
5.2.2 Installation Procedure
Draw and drill the screw holes on the wall where there is the 90° included angle
according to the mounting hole on the corner-mounted bracket pedestal, and insert M8
expansion screws. See Figure 5-3.
Route the cables through the corner-mounting bracket pedestal (reserve enough
length of the cables), and fix the pedestal on the wall with the M8 screws. Apply silicon
sealant to cover the cable outlet for waterproof.
Installing corner-mounted bracket
Install the speed dome on the corner-mounted bracket, see
错误
!
未找到引用源。
. For
details about speed dome installation, see "2.6 Speed Dome Installation" and "3.2
Installing Wall-mounted Bracket".
