Dahua 5.8GHz Wireless AP/CPE User Manual
- 28 -
100Mbps.
Signal Intensity LED Setting:
The setting of LED1, LED2 and LED3 here is the signal intensity value
which is needed to light three LED lights. The signal intensity value of LED3 is the biggest
(LED3>LED2>LED1), default settings are LED1:-86dB, LED2:-71dB and LED3:-56dB respectively. The
LED1 will be on if the signal intensity is higher than LED1 but lower than LED2; both the LED1 and LED2
will be on when signal intensity is higher than LED2 but lower than LED3; All of the LED1, LED2 and
LED3 will be on when the signal intensity is higher than LED3.
9. System Settings
There are four parts on the system setting interface which are configuration management, firmware
configuration, device configuration and account information, see Figure 23 and 24 for more details.
