Dahua 5.8GHz Wireless AP/CPE User Manual
- 22 -
Network Name (SSID):
Used to control the value of access to wireless network. When other devices try
to connect to this device, only with same setting of SSID can they realize intercommunication and build
LAN.
As shown in Figure 20, users can search the names of surrounding wireless network by click
“select” on
the right of network name, and then connect to corresponding wireless network according to his own
demand.
Frequency: Center frequency of carries wave, bandwidth is the left-right offset of the center frequency. It
needs to be set parameter when it is used as AP mode. Users can select several frequencies when it is
client mode. Client can
’t connect to AP when the frequency of AP is not the frequency selected by client.
Only when the frequency of AP is one of the frequencies selected by client can they be interconnected.
Output Power:
Users can adjust the output power of device transmitting wireless signal according to the
distance between devices. The transmitted signal distance and intensity will improve when output power
goes up.
Country Code:
Country code can be used to distinguish different standard channel between different
countries or regions.
Channel Width:
It means max data transmission rate of the channel.
Max Send/Receive Rate:
Limit the device max send/receive rate by setting it and keep the stability of
device performance by dong so.
Root Access Point MAC Address:
Client, WDS Repeater or WDS client can limit the object that the
device is to connect by setting it.
Wireless Encryption:
Make encryption to wireless connection, users can select corresponding
encryption way according to their own demand for safety. The devices which are to be interconnected
need to be set the same wireless encryption, otherwise, they won
’t be interconnected.
WEP:
Wired equivalent encryption technology, a data encryption technology.
