Dahua 5.8GHz Wireless AP/CPE User Manual
- 19 -
with route mode
MAC
route mode
Network Mode
Operation mode, route
mode or bridge mode
Network
Name
Name of wireless network
Frequency/Channel Communication channel
Channel width Four types: 5M
、
10M
、
20M
、
20/40M AUTO
Wireless Mode
Client, access point,
WDS client, WDS access
point, WDS repeater
Way of
encryption
Several ways of encryption for
wireless
Distance
The distance between
client and access point
which are interconnected
Low
Noise
Interference from external
environment
Signal Intensity
Parameter for Client,
WDS client, WDS
repeater, which indicates
the total signal intensity
of client and the signal
intensity of up and down
two way for client
Link
Quality
The quality of link connection
Send/receive
connection rate
Parameter for client,
WDS client, WDS
repeater, which indicates
the momentary rate of
sending/receiving data
for current device
Time
Time display. Time will auto
update to calibration time from
NTP service when NTP client is
enabled and NTP service is set
right. There will be a default if
you can’t log on the Internet.
Sheet 7
5.2 Real-Time Monitoring
Throughput Rate:
Throughput rate is also called throughput capacity, which means the data volume
passing through each section in unit time while the throughput rate on status display page means the
data volume transmitting through network in unit time, which is the main index to measure network
performance. Users can also real time monitor the rate of device transmitting data volume by it. See
figure 14 for more information.
