Dahua Technology XVR4 Series User Manual Download

Page: 18 / 330

Getting Started

2.2.2 DH-XVR7104E-4KL-X/DH-XVR7108E-4KL-X/DH-XVR7104E-

4KL-B-X/ DH-XVR7108E-4KL-B-X

2.2.2.1 Installing Battery

The battery is only provided with some models.

1. Pull the battery cable through the hole.

2. Connect to the cable into the port.

2.2.2.2 Installing HDD

Skip step 6 if the battery is not equipped with the model you purchased.

1. Remove the screws to take

off the cover.

2. Remove the screws to take

off the bracket.

3. Put the HDD onto the

bracket.

4. Match the holes on the

bracket with the screw

holes on HDD.

5. Use screws to fix the HDD

onto the bracket.

6. (Optional) Pull the

battery cable through

the hole to connect into

the cable port.

Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands