![background image](http://html1.mh-extra.com/html/dahua-technology/lite-n42b3p-series/lite-n42b3p-series_user-manual_500755099.webp)
Local Basic Operation
87
Table 4-4
Parameter
Description
System Time
In the
System Time
box, enter time for the system.
Click the time zone list, you can select a time zone for the system,
and the time in adjust automatically.
Do not change the system time randomly; otherwise the recorded
video cannot be searched. It is recommended to avoid the recording
period or stop recording first before you change the system time.
System Zone
In the
System Zone
list, select a time zone for the system.
Date Format
In the
Date Format
list, select a date format for the system.
Date Separator
In the
Date Separator
list, select a separator style for the date.
Time Format
In the
Time Format
list, select
12-HOUR
or
24-HOUR
for the time
display style.
DST
Enable the Daylight Saving Time function. Click
Week
or click
Date
.
Start Time
Configure the start time and end time for the DST.
End Time
NTP
Enable the NTP function to sync the Device time with the NTP
server.
If NTP is enabled, device time will be automatically synchronized
with server.
Server
In the
Server
box, enter the IP address or domain name of the
corresponding NTP server.
Click
Manual Update
, the Device starts syncing with the server
immediately.
Port
The system supports TCP protocol only and the default setting is
123.
Interval (Min.)
In the
Interval
box, enter the amount of time that you want the
Device to sync time with the NTP server. The value ranges from 0 to
65535.
Step 3 Click
Next
button to save settings.
4.1.4.1.3 Holiday
Here you can add, edit, delete holiday. After you successfully set holiday information, you can
view holiday item on the record and snapshot period.
You can also configure holiday settings by selecting
Main Menu > SYSTEM > GENERAL >
Holiday
.
Step 1 Click
Next
.
The
Holiday
interface is displayed. See Figure 4-18.