![background image](http://html1.mh-extra.com/html/dahua-technology/dh-pfr4k-b240/dh-pfr4k-b240_user-manual_3218115036.webp)
User’s Manual
30
On the web client, click
Draw Line
to draw the measured distance on the image.
2)
Click and hold the left mouse button to start drawing, and then release the button to
3)
complete drawing.
Double-click the map to enter full screen display to draw the line more
accurately.
Click
Clear
to
clear the line you drew.
Enter the actual measured length of the line you drew in the
Line Length
input box
4)
and then click
Calculate Map Size
.
The system will automatically get the map width and height.
Click
Next
.
5)
Radar Positioning
Drag the end points of the yellow sector on the map to adjust the radar orientation.
Step 1
When the dotted line points to the right horizontally, it is considered as 0°. The
degree increases clockwise, and you can also adjust degree value by clicking
/
or entering a number.
Double-click the map to enter full screen to position the radar more accurately.
Radar positioning
Figure 4-14
Enter installation height of the radar in
Altitude
box.
Step 2
Enter height of the radar center (front side); otherwise the camera-radar linkage effect will
be reduced.
Click
Next
.
Step 3
(Optional) Radar Calibration