DAHON X-FUSION, User Manual

Page: 13 / 20

1
: Maintenance
X-Fusion shock absorbers are high performance products. The hydraulic dampers are not designed to be serviceable
by the end user. DO NOT PUNCTURE, EXPOSE TO HIGH TEMPERATURES or DISSASSEMBLE. The Manufacturer’s
warranty will be VOID if the hydraulic damper is opened by an unauthorized person. Improper assembly of a shock
could result in an accident or serious injury.
Always keep you shock clean. Use warm water, mild soap and a soft scrub brush to clean your shock. NEVER USE A
HIGH POWERED WASHER FOR CLEANING YOUR SHOCK! After cleaning apply a light film of grease or oil the shock
shaft and pivot hardware.
: Air Sleeve Service
The seals of the air sleeve are top quality, high pressure seals. The function of these seals is to contain the high air
pressure required for the air spring system to deliver the proper spring rate. It is very important that these seals are
cleaned and lubricated on scheduled intervals. The air sleeve service can be performed by the consumer, a dealer or an
authorized X-Fusion Service Center.
: Service Intervals
Conditions Frequency Activity
Normal Before each ride Clean shock body
Mud & Wet Every 15 hours Air sleeve service
Dry Every 50 hours Air sleeve service
All Every 200 hours Complete shock rebuild