27
metal receptor
Rear Magnetic button
Nylon bumper
Main Tube
Step 1 –Loosen the nut with a 10mm open end
wrench.
Step 2 - Adjust the nylon bumper that is against
the main tube.
Step 4 - Turn and adjust rear magnetic button.
Step 3 - Loosen the locknut on the rear wheel
with a 15mm open end wrench.
Step 5 - Loosen the locknut with 2 sets of open
end wrenches in 10mm.
NO 2 NOTE: After fold, adjust nylon limit column and magnetic buckle assembly with
2 sets of open end 10mm wrenches and 1 set of 15mm.