WARNING:
Be sure there is no oil or lubrication on
the rim or brake pads surface.
NOTE:
In general, lubricate two months
a time regularly.
Other notice items
30
Brake Adjusting and Brake
Pad Changing Advice
Under poor brake adjustment or serious brake
pad abrasion condition, it will threat rider's safety,
please adjust or replace the fittings. Your bike's
brake has been set and adjusted. So left brake
lever controls rear brake, right brake lever controls
front brake, Please be sure your hand can touch
and press the brake lever. Please adjust it
according to consumer habits.
Bicycle rim brake is based on the brake
mechanism of the friction between the sides.
In general, the friction is between the rim
and brake block. To ensure maximum wiping
friction, please keep clean for rim and brake
block, and be sure no dust, lubrication, wax
or brightener for decreasing friction factor
materials.
Brake pads are the loss products. In accordance
to the wear of them, you should properly
adjust the brake or brake pads.
Riding safety
Before every riding, please carefully check bicycle
brake, tires, handlebar, folding machines etc parts,
to ensure that the bicycle is in good condition.
You are responsible with obeying the relevant laws
in the riding zone, included the relevant sets law to
obey for yourself and bike set.
Raining will affect the traction and brake system
function of the tires. In the rain, the bike's friction
drag will be decreased drastically, so it is difficult
for you to control the speed and easier lose the
control of the bike. f you want to determine you
can slow the speed down in a rainy day and safety,
please keep the speed lower than general weather,
and brake slowly earlier.
If the frame or stem, quick release are adjusted
too loose. Rider may fall down or and get injured.
The folding place also maybe serious damaged.
If too tight, it will damage the latch bolt. Before
riding, check the frame and stem latch again.
After you ride your fist 30miles, please be sure
to check the crank's nut. Be sure the nut is tight
for rider's safety.
Only with factory authorized replacement parts
to replace the brake brake pads
Lubrication
Front/Rear axle, B.B. set, headset should
be lubricated regularly. The general use is
butter. When some precise parts should
lubricate, please use the liquid lubrication
(e. g.:air-tool oil). Chain should lubricate with
chain specialized lubrication.
Unassembly Parts, Available
Parts and Accessories
Before unassembled parts, available parts
and accessories are shipped, right pedal is
unassembled. Right foot fix as per right
rotation screw direction before riding. If every
axle bearing damages, you should immediately
exchange for safety. The different rim spec.
Maybe need match with different spec's parts.
e.g.: tire, inner tube, brake block etc. Please
confirm by yourself according to the model as
your purchasing. Or please contact the local
distributor. No attachment with bike.
Please check the reflectors and reflector truss
regularly. To be sure if they are clean, straight,
no cracks or fixed strongly. If the reflectors are
damaged, please go to the dealer to exchange
them: If it is deflection or loose, please pull
straightly or lock it.
