- 9 -
4. STANDARD COMPOSITION AND ACCESSORIES
4.1 Standard Composition
٨
The part names indicated in the boxes are standard parts. They are not supplied with this
welding machine. Preparation of the standard parts except the welding power source is
required to use the welding power source.
٨
Input cable and grounding cable
For a switch box, the 2m input and grounding cables are from the back panel of welding power
source.
Input cable
AWG12 4mm
2
with 10mm
Ǿ
terminal x 3
Grounding cable
AWG12 4mm
2
with 10mm
Ǿ
terminal x 1
4.2 Accessory
Check the quantity of parts when opening the package.
Description Specification
Q’ty
Part
No.
Remarks
Power Cable connector
DIX SK 50
1
4734-016
For base metal and holder
cable
4.3 Other Equipment
(1) TIG Welding
٨
Use argon gas for welding with 99.9 % or more purity.
٨
Use the proper filler wire for material, plate thickness, etc.
(2) STICK Welding
٨
Use the proper stick welding electrode for purpose of use, welding position, shape of joint,
etc.
٨
Use the electrode holder electrically insulated.
Base
metal
Analog
remote
control
㧔
Optionally
available
㧕
Digital
remote
control
㧔
Optionally
available
㧕
Argon
gas
3
Ǿ
400V
Input
cables (2m)
Gas regulator
Welding
power
source
Gas
hose
Welding
torch
Torch
switch
Base
metal
cable
Connect
to
the
water waste
treatment
equipment
or
the
water
cooler
(when
using
the
water-cooled
torch)
Ground a work piece if
required by local law.
Water hose
Tap water or water cooler
(not needed for STICK welding
and for use of the air-cooled
torch)