device to quickly release the air from the cuff and the device will
return to standby mode.
Read and log readings in the device’s memory
The appliance automatically saves 2x90 reading results in its
memory. Once more than 90 readings have been taken, the
oldest data is replaced by the newest.
Press the memory button (D) while the appliance is turned off
and the screen will display the average of the last 3 readings
Pressing the memory button once again will display the last
reading taken, as well as the subsequent readings every time the
memory button is pressed.
Select the user.
In order to select between user 1 and 2, press the settings
button (C) while the apparatus is turned off, and the display will
show the selected user and the memories recorded in the device
for the same. Press the memory button (D) to move from one
user to another depending on the one you wish to use to review
the reports or take a reading.
Clear the memory reading log
If you really wish to clear all he memories stored in the applian-
ce, press the settings button 7 times, with the apparatus turned
off, until CL is displayed on the screen. Then press the on/off
button, and the letters CL will flash 3 times, deleting the reading
logs. Then press the memory button and the screen will display
NO, meaning that there are no memories saved in the appliance.
To ensure that the values are comparable, always take a pressure
reading at the same time. If you want to perform more than
one reading for the same person, wait 5 minutes between each
reading. Repeat the reading if you do not trust the validity of the
reading values. In the event that you believe that the results are
not correct, take the appliance to a Technical Support Service.
As this is a home use product, it does not need to be calibrated.
Manual Tensio Brazo Bluetooth.indb 18
23/9/15 8:11
