month and day. Begin by selecting the year, by pressing the
memory button to change between 1 to 12 and confirming with
the settings button. Then proceed to do the same for the day of
the month, selecting with the memory button and confirming
with the settings.
Once you have confirmed the date, the appliance will move to
the hour setting mode,with the hour flashing. Press the memory
button to increase the hour, allowing you to choose between 0 to
23, confirming with the settings button. Once the time has been
confirmed, the digits corresponding to the minutes will begin
to flash. Select using a memory button, allowing you to choose
between 00 to 59, and confirming the minute with the selected
settings” button.
If at any time you need to re-set the date or time, while the
product is turned off press the set button twice, and the year
will start to flash on the screen. Follow the steps above to modify
year and to set the date and time.
Take a reading.
Place the cuff on the top of your left arm and adjust it as indica-
ted in Fig.1. Rest for about 5 minutes before taking the reading
Failure to do so may cause deviations.
You can take the pressure lying calmly and straight or sitting
upright, supporting your arm on a table, ensuring that the arm
rests at the height of the heart, as shown in Fig.2 Rest your
hand on the table with your palm facing upwards.
While the reading should be taken from your left arm., if this is
not possible, perform it on your right arm, remembering that all
readings should be performed on the same arm.
Adjust the cuff on your arm so that the air pipe remains on the
side of your hand. Ensure to leave a space of 2-3cm between the
inside of your elbow and the cuff ensuring that two fingers can
comfortably fit in between your arm and the cuff.
Remove any item of clothing that might be putting pressure on
your arm.
Manual Tensio Brazo Bluetooth.indb 16
23/9/15 8:11
