7
6
Tuning your video to the TV using an antenna cable (RF cable)
If you have connected your video through the scart connection (diagram 2 on page 2), go to
page 7.
Use the following method to tune your video in if you have connected it through RF cable (as
shown in diagram 1 on page 2)
Once you have carried out the steps in ‘Setting up your video’ (diagram 1 on page 2), switch on
your TV.
Press
on the remote control and RF52 will be
displayed on the front of your video.
1
2
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
SVENSKA
SUOMI
PR+/-:SELECT
OK:CONFIRM MENU:END
COUNTRY SET
B
N
D
NL
DK
S
E
SF
GR
CH
I
TR
LUX
OTHERS
PR+/-:SELECT
OK:CONFIRM MENU:END
Select the wanted language and country with
PR+
or
PR-
button. Press
OK
to confirm. Tune the TV,
using the pre-set functions on your TV as described
in its manual, until you see a blue CH search screen.
Store this setting on the TV and go to page 8.
For selecting the country, refer to the followings.
B: Belgium
D: Germany
DK: Denmark
E: Spain
GR: Greece
I: Italy
LUX: Luxembourg
N: Norway
NL: Netherlands
S: Sweden
SF: Finland
CH: Switzerland
TR: Turkey
You can also call a test-picture in the Videorecorder : press
OK
on the remote control
more than 5 seconds. Please search the test-picture of videorecorders with the
broadcasting-setting of your TV. Refer to operation manual. When you find the test-
picture, memorise it on the program place. Press
OK
on the remote control more than
5 seconds to exit the test-picture.
What to do if you get picture interference when using RF lead
Option 1
If other stations are positioned on or near the current RF OUTPUT CH, the following guide message
appears automatically.
The RF output can be adjusted from 21 to 69, this video is defaulted to RF52. If other
broadcasts are close to RF 52 they may cause picture interference, you can change the
RF output until your television has a noise-free channel for your video.
Change the RF output from 52 using the remote control.
Press
MENU
. Select ‘VCR Set Up’ by pressing
PR-
twice then
OK
.
Select ‘RF Output Set Up’ by pressing
PR-
twice then
OK
.
Change the channel number using buttons
0-9
.
Press
OK
to confirm. Press
MENU
to end.
Option 3
Buy a scart lead from your local electrical shop. Connect the scart lead as shown on page
2, diagram 2.
If you want to change the RF output in the future due to new broadcasting stations or equipment
and so on, press and hold the
OK
button on the remote control until RF 52 is displayed on the front
of the video. Then go to option 2 above.
PLEASE CHANGE THE TV
CH TO 54.
IMPORTANT!
Press
OK
to confirm.
Press
MENU
to end.
Option 2
RF OUTPUT SET
0-9:SET UP (21-69)
OK:CONFIRM MENU:END
CH 52
If there is still picture interference repeat option2.
RF OUTPUT SET
OK:CONFIRM MENU:END
CURRENT
CH 52
RECOMMENDED CH
54
