![background image](http://html1.mh-extra.com/html/daewoo/kot-170s0a/kot-170s0a_service-manual_498105012.webp)
11
4. REPLACING THE LINE FUSE
1. Remove 2 screws from the vent grille and remove the grille (See FIG. 1).
2. Remove the screw from the front of the microwave oven for wire protector and remove the wire protector(see Fig. 1).
3. Remove the screw from the top center tab of the control panel (See FIG. 2).
4. From the top and back of the control panel, pull out the Fuse Holder.
5. Without touching the metal ends, remove the defective line fuse from its holder and install a new one in it’s place.
6. Mount the control panel to the oven and secure it with it’s mounting screw.
7. Mount the vent grille to the microwave oven and check out the operation.
WARNING :
Personal Injury Hazard
Disconnect from the electrical supply before servicing the unit. Failure to do so could result shock or other per-
sonal injury.
FIG. 5
LINE FUSE HOLDER
Summary of Contents for KOT-170S0A
