Daewoo KOT-170S0A, Service Manual, Page: 11 / 70

10
3. REPLACING AN OVEN LIGHT SOCKET
1. Remove the screws for the vent grille and remove the grille.(See FIG.1)
2. Remove the cavity lamp cover(See FIG.3).
3. Reattach the wire connectors over the light socket terminals.
4. Remove the old light socket, and mount the new socket in its place .
5. Reinstall the cavity lamp cover into its air guide top.
6. Mount the vent grille to the microwave oven and check out the operation.
* If the socket holding snap fit has been broken, It is possible to use mounting screw.
WARNING :
Personal Injury Hazard
Disconnect from the electrical supply before servicing the unit. Failure to do so could result in electrical shock or
other personal injury.
FIG. 4
FIG. 3