8
Make sure the oven is properly installed and plugged into the electrical.
OPERATIONS AND FUNCTIONS
1. Connect the mains lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always
be in place during cooking.
3. Close the door securely.
4. When the oven door is opened, the light turns off.
5. The oven door can be opened at any time during operation by pushing the door release button on the control panel.
The oven will automatically shut off. To restart the oven, close the door and then touch START button.
6. Each time a pad is touched. a BEEP will sound to acknowledge the touch.
7. The oven automatically cook on full power unless set to a lower power level.
8. The display will show : 0 when the oven is plugged in.
9. Time clock returns to the present time when the cooking time ends.
10. When the STOP/CLEAR button is pushed during the oven operation, the oven stops cooking and all information
retained.
To erase all information (except the present time), push the STOP/CLEAR button once more. If the oven door is opened
during the oven operation, all information is retained.
11. If the START button is pushed and the oven does not operate, check the area between the door and door is closed
securely. The oven will not start cooking under the door is completely closed or the program has been reset.
Wattage output chart
The power level is set by touching the POWER pad. The chart shows the display, the power level and the percentage
of power.
Touch POWER Pad
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Power Level(Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
00%
Summary of Contents for KOR-6Q8G5S
Page 5: ...4 EXTERNAL VIEW 1 OUTER DIMENSION...
Page 25: ...24 WIRING DIAGRAM...
Page 27: ...26 Measure Point MP1 MP2 GND...
Page 29: ...28 2 PCB CIRCUIT DIAGRAM...