19
(TROUBLE 4)
The following visual conditions indicate a probable defective touch control circuit or membrane switch assembly
1. Incomplete segments,
1) Segment missing.
2) Partical segments missing.
3) Digit flickering other than normal display slight flickering.
4) “ : 0” does not display when power is on.
2. A distinct change in the display are not on when they numbers is the display.
3. One or more digits in the display are not on when they should be.
4. Display indicates a number different from one touched.
5. Specific numbers (for example 2 or 3) will not display when the panel is touched.
6. Display does not count down or up with time cooking or clock operation.
7. Oven is programmable and cooks normally but no display shows.
8. Display obviously jumps in time while counting down.
9. Display counts down noticeably too fast while cooking.
10. Display does not show the time of day when clear pad is touched.
11. Oven lamp and turntable motor do not stop although cooking is finished. Check if the RELAY 2 contacts close if they are close,
replace touch control circuit.
CONDITION
RESULT
CAUSE
REMEDY
Normal
Malfunction
of touch
control circuit
of control box
sub-assembly
Replace
control box
sub-assembly
CHECK
Display does
not show
programming
at all, even if
keyboard is
touched.
Abnormal
Malfunction
of the membrane
keyboard
Replace the
membrane
keyboard
Check each pad or
continuity of the membrane
keyboard for the following
keyboard check procedure
NOTE :
Before following the particular steps listed above in the trouble shooting guide for the membrane keyborad’s, failure,
please check for the continuity of each wire-harness between the membrane keyboard and P.C.B. assembly
