1
PRECAUTIONS TO BE OBSERVED BEFORE AND
DURING SERVICING TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
(a) Do not operate or allow the oven to be operated with the door open.
(b) Make the following safety checks on all ovens to be serviced before activating the magentron or other microwave
source, and make repairs as necessary: (1) Interlock operation, (2) proper door closing, (3) Seal and sealing
surfaces (arcing, wear, and other damage), (4) Damage to or loosening of hinges and latches, (5) Evidence of
dropping or abuse.
(c) Before turning on power to the microwave oven for any service test or inspection within the microwave generating
compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity,
and connections.
(d) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and
transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the
oven is released to the owner.
(e) A microwave leakage check to verify compliance with the Federal performance standard should be performed on
each oven prior to release to the owner.
SAFETY AND PRECAUTIONS
1. FOR SAFE OPERATION
2. FOR SAFE SERVICE PROCEDURES
SPECIFICATIONS
EXTERNAL VIEW
1. OUTER DIMENSION
2. FEATURE DIAGRAM
3. CONTROL PANEL
INSTALLATION
OPERATIONS AND FUNCTIONS
DISASSEMBLY AND ASSEMBLY
INTERLOCK MECHANISM AND ADJUSTMENT
TROUBLE SHOOTING GUIDE
MEASUREMENT AND TEST
1. MEASUREMENT OF THE MICROWAVE POWER OUTPUT
2. MICROWAVE RADIATION TEST
3. COMPONENT TEST PROCEDURE
WIRING DIAGRAM
PRINTED CIRCUIT BOARD
1. CIRUCIT CHECK PROCECDURE
2. PCB CIRCUIT DIAGRAM
3. P.C.B. LOCATION NO
EXPLODED VIEW AND PARTS LIST
1. DOOR ASSEMBLY
2. CONTROL PANEL ASSEMBLY
3. TOTAL ASSEMBLY
2
2
2
3
4
4
5
6
8
9
10
17
18
22
22
23
24
25
26
26
29
30
32
32
32
32
TABLE OF CONTENTS
TABLE OF CONTENTS