8
1500W Oil Filled Radiator
Model No. HEA1820
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Fitting the Straight Wheel Plate (9)
Remove the
Wing Nuts
(12) from the other
U-bolt
(11) and loop the U-Bolt
between the end and next to the end fins, attach the Straight Wheel Plate (9 -
above right) securing in place using the wing nuts as in the image below, taking
care not to overtighten:
Once the wheel plates and castors are attached invert the radiator the correct way
up onto its castors and place into the desired position ensuring that it is stable and
vertical. The oil inside the radiator will be heard to settle inside this is quite
normal.
LEAVE TO STAND UPRIGHT FOR ONE HOUR TO ALLOW FOR
THE OIL TO SETTLE.
Castor (7)
Straight Wheel Plate (9)
Domed Nut (10)
U
–
Bolt (11)
End Fin
Next to End Fin
NB
Radiator shown upside
down for clarity
Wing Nuts (underside)
