13
1500W Oil Filled Radiator
Model No. HEA1820
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
6.
Using the timer
Using the Remote Control (20)
•
The
Remote Control
(20) duplicates all the functions on the
Control Panel
(3) as described above.
•
Slide the Battery compartment cover in the direction of the
arrow and remove.
•
Insert 2x 1.5V AAA Batteries (Not Supplied) being careful to
observe the polarity markings inside.
•
Replace the battery cover.
NB
The
Mains On/Off Switch
(5) must be in the on (I) position for
the
Remote Control
(20) to operate.
Auto off mode
–
this will switch the radiator off
after a set period of hours.
First, set the heat settings as described above.
Press the
Mode
button (15) until the
LCD Display
(2) shows
‘AUTO OFF’
as shown right.
Press the
In
(16) and
Reduce -
(18) buttons
to set the time the heater stays on for between 1
and 24 hours.
The heater will automatically switch off once the
set
‘AUTO OFF’
time has passed.
Auto on mode
–
this will switch the radiator on
after a set period of hours.
Press the
Mode
button (15) until the displays
shows
‘AUTO ON’
as shown right.
Press the
In
(16) and
Reduce -
(18) buttons
to set the time the heater stays on for between 1
and 24 hours.
The heater will automatically switch on once the
set
‘AUTO ON’
time has passed.
NB
The ‘AUTO OFF’ symbol and the clock symbol will flash whilst setting the AUTO
OFF time, the symbols will stop flashing after a short delay and the radiator will
begin counting down the off time.
NB
The
‘AUTO ON’
symbol and the clock symbol will flash whilst setting the AUTO
ON time, the symbols will stop flashing after a short delay and the radiator will
begin counting down the on time.
